REAR DOOR SPEAKER INSPECTION


  1. INSPECT REAR NO. 1 WITH BOX SPEAKER ASSEMBLY

    Tech Tips

    Remove interior parts so that the rear No. 1 with box speaker assembly can be seen.


    1. Check the speaker installation.

      OK
      The speaker is securely installed.

      If the result is not as specified, reinstall the rear No. 1 with box speaker assembly.

    2. Visually check the speaker.

      OK
      The cone paper of the speaker is not torn.

      If the result is not as specified, replace the rear No. 1 with box speaker assembly.

    3. A01CG11E59
      Text in Illustration
      *a

      Component without harness connected

      (Rear No. 1 with Box Speaker Assembly)

      Speaker resistance check


      1. Disconnect the rear No. 1 with box speaker assembly connector.

      2. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 3.2 to 4.8 Ω

        If the result is not as specified, replace the rear No. 1 with box speaker assembly.

  2. INSPECT REAR NO. 3 SPEAKER ASSEMBLY (w/ Front Center Speaker)


    1. With the speaker installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

    3. A01CE8VE02
      Text in Illustration
      *a

      Component without harness connected

      (Rear No. 3 Speaker Assembly)

      Measure the resistance of the speaker.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 10 kΩ or higher

      If the result is not as specified, replace the speaker.

    4. When there is a possibility that either the right or left speaker is malfunctioning, interchange the speakers and perform an inspection. If the malfunction disappears after interchanging the speakers, replace the malfunctioning speaker.

      Tech Tips

      Connect all connectors to the speakers when performing an inspection. If the result is not as specified, replace the speaker.