REAR DOOR SPEAKER REMOVAL


  1. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. Move the door inside handle knob to the lock position.

    2. A01CG64

      Using a T25 "TORX" socket wrench, remove the screw.

    3. Using a clip remover, disengage the 15 clips and 5 claws.

    4. Disconnect the connector and remove the rear door trim board sub-assembly.

  2. REMOVE NO. 1 WITH BOX SPEAKER ASSEMBLY


    1. A01CE32

      Disconnect the connector.

    2. Remove the 3 bolts.

    3. Disengage the clamp and remove the No. 1 with box speaker assembly.

      Note

      Do not touch the cone part of the speaker.

  3. REMOVE SLIDE DOOR WINDOW GARNISH (w/ Front Center Speaker)


    1. A01CCFR

      Disconnect the connector.

    2. Disengage the 5 clips and remove the slide door window garnish.

  4. REMOVE REAR NO. 3 SPEAKER ASSEMBLY (w/ Front Center Speaker)


    1. A01CDPR

      Disengage the clamp.

    2. Disengage the 3 claws and remove the rear No. 3 speaker assembly as shown in the illustration.

      Note

      Do not touch the cone part of the speaker.