Click here

RADIO ANTENNA CORD REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    (Click here)

  2. Click here

    REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)


    1. A01CBWS

      Disconnect the 2 connectors and remove the bolt.

    2. Disengage the 9 clamps and remove the antenna cord sub-assembly.

  3. Click here

    REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)


    1. w/o Front Center Speaker:


      1. A01CBZY

        Disconnect the 2 connectors and remove the bolt.

      2. Disengage the 8 clamps and remove the antenna cord sub-assembly.

    2. w/ Front Center Speaker:


      1. A01CE42

        Disconnect the connector and remove the bolt.

      2. Disengage the 7 clamps and remove the antenna cord sub-assembly.

  4. Click here

    REMOVE ROOF HEADLINING ASSEMBLY

    (Click here)

  5. Click here

    REMOVE REAR NO. 2 WASHER HOSE (w/o Sliding Roof)


    1. A01CBNTE03

      Peel off the strips of the tape used to secure the washer hose and antenna cord only enough to allow removal of the rear No. 2 washer hose and No. 2 antenna cord sub-assembly. (Procedure A)

      Table 1. Text in Illustration
      *a Front Side - -
      Tip:

      Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.

    2. Disengage the 10 clamps and remove the rear No. 2 washer hose.

  6. Click here

    REMOVE REAR NO. 2 WASHER HOSE (w/ Sliding Roof)


    1. A01CD2NE01

      Peel off the strips of the tape used to secure the washer hose and antenna cord only enough to allow removal of the rear No. 2 washer hose and No. 2 antenna cord sub-assembly. (Procedure A)

      Table 2. Text in Illustration
      *a Front Side - -
      Tip:

      Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.

    2. Disengage the 10 clamps and remove the rear No. 2 washer hose.

  7. Click here

    REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/o Sliding Roof)


    1. Peel off the strips of the tape used to secure the washer hose and antenna cord only enough to allow removal of the rear No. 2 washer hose and No. 2 antenna cord sub-assembly.

      Tip:

      • If the strip of the tape have already been peeled off in procedure A, this step is not necessary.

      • Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.

    2. A01CDLHE03

      Disengage the 6 clamps and remove the No. 2 antenna cord sub-assembly from the roof headlining.

      Table 3. Text in Illustration
      *a Front Side - -
  8. Click here

    REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/ Sliding Roof)


    1. Peel off the strips of the tape used to secure the washer hose and antenna cord only enough to allow removal of the rear No. 2 washer hose and No. 2 antenna cord sub-assembly.

      Tip:

      • If the strips of the tape have already been peeled off in procedure A, this step is not necessary.

      • Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.

    2. A01CB6CE03

      Disengage the 6 clamps and remove the No. 2 antenna cord sub-assembly from the roof headlining.

      Table 4. Text in Illustration
      *a Front Side - -