AUDIO AND VISUAL SYSTEM, Diagnostic DTC:44-46

DESCRIPTION

INSPECTION PROCEDURE

PROCEDURE

1. Click here

   CHECK THAT DISC IS INSERTED PROPERLY

   
   

   1. Check whether or not the disc is inserted upside down.

      OK
      Disc is properly inserted.

   
   
   • OKClick here
   • NGClick here
2. Click here

   CHECK DISC

   
   
   1. 

      Check that the disc is not deformed or cracked.

      OK
      No deformation or cracks on the disc

   
   
   • OKClick here
   • NGClick here
3. Click here

   DISC CLEANING

   
   
   1. 

      Disc cleaning

      
      

      1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

         Note:

         Do not use a conventional record cleaner or anti-static preservative.

   
   
   • NEXTClick here
4. Click here

   CLEAR DTC

   
   

   1. Clear the DTCs (Click here).

   
   
   • NEXTClick here
5. Click here

   RECHECK FOR DTC

   
   

   1. Recheck for DTCs and check if the same DTC is output again.

      OK
      No DTCs are output.

   
   
   • OKClick here
   • NGClick here
6. Click here

   REPLACE DISC WITH ANOTHER AND RECHECK

   
   

   1. Replace the disc with another and recheck.

      
      

      1. Replace the disc with a known good one.

      2. Clear the DTC (Click here).

      3. Recheck for DTCs and check if the same DTC is output again.

         OK
         No DTCs are output.

   
   
   • OKClick here
   • NGClick here
7. Click here

   SET DISC

8. Click here

   DISC IS FAULTY

9. Click here

   REPLACE TELEVISION DISPLAY ASSEMBLYClick here

10. Click here

    END