PARKING BRAKE PEDAL (for RHD) REASSEMBLY


  1. INSTALL PARKING PEDAL PAD

  2. INSTALL PARKING BRAKE SWITCH ASSEMBLY


    1. A01CCC6

      Install the parking brake switch assembly with the screw.

      Torque:
      3.2 N*m  { 33 kgf*cm, 28 in.*lbf }

  3. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY


    1. A01CDMY

      Install the No. 1 parking brake cable assembly to the parking brake control pedal assembly with a new clip.

    2. A01CFDUE01

      Install the No. 1 parking brake cable assembly to the parking brake control pedal assembly through the guide, and temporarily tighten the No. 1 wire adjusting nut and lock nut.

      Tech Tips

      Completely tighten the lock nut when adjusting the parking brake pedal travel.

    3. Using needle-nose pliers, bend the claw of the parking brake control pedal assembly.