FRONT BRAKE REASSEMBLY


  1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG

    Tech Tips

    Fully tighten the front disc brake bleeder plug after bleeding any air left in the system.

  2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

  3. INSTALL PISTON SEAL


    1. A01CCMCE02

      Apply a light layer of lithium soap base glycol grease to the entire circumference of a new piston seal as shown in the illustration.

    2. Install the piston seal to the front disc brake cylinder assembly.

      Note

      Securely install the piston seal into the groove of the front disc brake cylinder.

  4. INSTALL FRONT DISC BRAKE PISTON


    1. A01CB0FE01

      Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot as shown in the illustration.

    2. Apply a light layer of lithium soap base glycol grease to the entire circumference of the front disc brake piston as shown in the illustration.

    3. Install the cylinder boot to the front disc brake piston.

      Note

      Securely install the cylinder boot into the piston groove of the front disc brake cylinder.

    4. Install the front disc brake piston to the front disc brake cylinder assembly.

      Note

      Do not force the front disc brake piston when installing it to the front disc brake cylinder assembly.

  5. INSTALL CYLINDER BOOT


    1. A01CD9ME01

      Install the cylinder boot to the front disc brake cylinder assembly.

      SST
      09608-10010
      09950-70010   ( 09951-07150 )

      Note


      • Do not damage the cylinder boot.

      • Securely install the cylinder boot to the groove of the front disc brake cylinder assembly.