Click here

YAW RATE AND ACCELERATION SENSOR INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL YAW RATE AND ACCELERATION SENSOR


    1. A01CB4A

      Install the yaw rate and acceleration sensor to the body with the 2 bolts.

      6.0 N*m 61 kgf*cm 53 in.*lbf
      Note:

      • Keep foreign matter from adhering to the area between the yaw rate and acceleration sensor and body.

      • Do not damage the yaw rate and acceleration sensor.

      • Make sure that the yaw rate and acceleration sensor is installed securely.

    2. A01CGAL

      Connect the connector to the yaw rate and acceleration sensor.

      Note:

      Make sure that the yaw rate and acceleration sensor connector is connected securely.

    3. A01CEZ5

      Turn back the floor carpet cutout covering the yaw rate and acceleration sensor.

  2. Click here

    INSTALL FRONT SEAT ASSEMBLY RH (for RHD)

    Tip:

    Refer to the procedure from Install the Front Seat Assembly RH.

    for driver side power seat (Click here)

    for manual seat (Click here)

  3. Click here

    INSTALL FRONT SEAT ASSEMBLY RH (for LHD)

    Tip:

    Refer to the procedure from Install the Front Seat Assembly RH.

    for passenger side power seat (Click here)

    for manual seat (Click here)