VEHICLE STABILITY CONTROL SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

VEHICLE BROUGHT TO WORKSHOP

NEXT

CUSTOMER PROBLEM ANALYSIS

1. Interview the customer and confirm the trouble Click here.

   Tech Tips

   Interview the customer to confirm the following:

   
   

   • History of brake fluid replacement.

   • Whether the engine was stopped intentionally when driving.

   • Whether the brake and accelerator pedals were depressed simultaneously.

   
   

   NEXT

CHECK DTC AND FREEZE FRAME DATA*

1. Check and record a DTC and Freeze Frame Data.

2. Clear the DTC and Freeze Frame Data Click here for DTC Check/Clear, or Click here for Freeze Frame Data).

3. Reconfirm the DTC.

   
   

   1. Reconfirm the DTC based on the recorded DTC and Freeze Frame Data Click here for DTC Check/Clear, or Click here for Freeze Frame Data).

      Tech Tips

      If any of the DTCs U0100/65, U0123/62, U0124/95 and U0126/63 is output together with a CAN communication DTC, first check the appropriate sensor for a momentary open circuit Click here.

      Result
      Result Proceed to DTC is output A DTC is not output (Problem symptom does not occur) B DTC is not output (Problem symptom occurs) C

   
   

   B

   GO TO STEP 5

   C

   GO TO STEP 6

   A

DIAGNOSTIC TROUBLE CODE CHART

1. Proceed to Diagnostic Trouble Code Chart Click here.

   
   

   NEXT

   GO TO STEP 7

SYMPTOM SIMULATION

1. Proceed to Diagnosis System Click here.

   
   

   NEXT

PROBLEM SYMPTOMS TABLE

1. Proceed to Problem Symptoms Table Click here.

   
   

   NEXT

CIRCUIT INSPECTION*

NEXT

IDENTIFICATION OF PROBLEM

NEXT

REPAIR OR REPLACEMENT

NEXT

CONFIRMATION TEST*

NEXT