Click here

VEHICLE STABILITY CONTROL SYSTEM, Diagnostic DTC:C1288/88

Click here
Click here Click here
DTC Code DTC Name
C1288/88 ECU Version Miss Match
Click here

DESCRIPTION

DTC No. DTC Detection Condition Trouble Area
C1288/88 ECM does not match. ECM
Click here

INSPECTION PROCEDURE

Click here

PROCEDURE


  1. Click here

    CHECK CAN COMMUNICATION SYSTEM


    1. Check if the CAN communication system DTC is output (Click here).

      Result
      Result Proceed to
      DTC is not output A
      DTC is output B

  2. Click here

    PERFORM ENGINE VARIANT LEARNING


    1. Perform engine variant learning (Click here).

      Tip:

      • Engine variant learning is automatically performed immediately after the Test Mode is entered.

      • The ABS warning, brake warning and SLIP indicator lights come on for 3 seconds after learning.


  3. Click here

    RECONFIRM DTC


    1. Turn the engine switch off.

    2. Clear the DTC (Click here).

    3. Start the engine.

    4. Check if the same DTC is recorded (Click here).

      Result
      Result Proceed to
      DTC (C1288/88) is not output A
      DTC (C1288/88) is output (for 2GR-FE) B
      DTC (C1288/88) is output (for 2AZ-FE) C

  4. Click here

    INSPECT CAN COMMUNICATION SYSTEMClick here

  5. Click here

    REPLACE ECM (2GR-FE)Click here

  6. Click here

    REPLACE ECM (2AZ-FE)Click here

  7. Click here

    END