FRONT DRIVE SHAFT ASSEMBLY INSPECTION


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. A01CG7VE02

      Check that there is no excessive play in the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial directions of the inboard joint.

    4. A01CBDIE01

      Check the boots for damage.

      Note

      Keep the drive shaft assembly level during inspection.

      Tech Tips

      For dimension (A), refer to the following values.

      Dimension (A)
      Item LH Side RH Side
      2AZ-FE 580.2 to 590.2 mm (1.91 to 1.93 ft.) 897.0 to 907.0 mm (2.95 to 2.97 ft.)
      2GR-FE 572.6 to 582.6 mm (1.88 to 1.91 ft.) 909.4 to 919.4 mm (2.99 to 3.01 ft.)