PARK / NEUTRAL POSITION SWITCH ADJUSTMENT


  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Move the shift lever to N.

    2. Remove the battery carrier support.

      Tech Tips

      See the steps from Remove Radiator Cover Sub-assembly through Remove Battery Carrier Support Click here.

    3. A01CAQPE03
      Text in Illustration
      *1 Neutral Basic Line
      *2 Protrusion

      Loosen the 2 bolts of the park/neutral position switch.

    4. Align the protrusion with the neutral basic line.

    5. Hold the switch in that position and tighten the 2 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    6. Install the battery carrier support.

      Tech Tips

      See the steps from Install Battery Carrier Support through Install Radiator Cover Sub-assembly Click here.

    7. After the adjustment, perform the switch operation check Click here.