OIL PUMP REASSEMBLY


  1. INSTALL FRONT OIL PUMP OIL SEAL


    1. A01CFPBE01

      Using SST and a hammer, install a new oil seal to the oil pump body.

      SST
      09350-32014   ( 09351-32140 )
      Oil seal driven in depth
      -0.25 to 0.25 mm (-0.00984 to 0.00984 in.)

    2. Coat the lip of the oil seal with MP grease.

  2. INSTALL FRONT OIL PUMP BODY O-RING


    1. A01CCMW

      Coat a new O-ring with ATF and install it to the oil pump body.

      Note

      Ensure that the O-ring is not twisted.

  3. INSTALL FRONT OIL PUMP DRIVEN GEAR


    1. A01CB7W

      Coat the front oil pump driven gear with ATF and install it to the oil pump body with the marked side up.

  4. INSTALL FRONT OIL PUMP DRIVE GEAR


    1. A01CDXL

      Coat the front oil pump drive gear with ATF, and install it to the oil pump body with the marked side up.

  5. INSTALL STATOR SHAFT ASSEMBLY


    1. A01CCD0E01

      Align each knock pin of the stator shaft with the holes in the oil pump body and install the stator shaft to the oil pump body.

    2. Using a "TORX" socket (T30), install the 16 bolts.

      Torque:
      9.3 N*m  { 95 kgf*cm, 82 in.*lbf }

      -

      Bolt Length

      Bolt A

      		 14 mm (0.551 in.)

      Bolt B

      		 26 mm (1.02 in.)

  6. INSPECT FRONT OIL PUMP AND GEAR BODY SUB-ASSEMBLY


    1. A01CFSH

      Turn the drive gear with 2 screwdrivers and make sure that it rotates smoothly.

      Note

      Be careful not to damage the oil seal lip.