DIFFERENTIAL CASE DISASSEMBLY


  1. REMOVE FRONT DIFFERENTIAL RING GEAR

    A01CCE8E06

    1. Place the matchmarks on the ring gear and differential case.

      Text in Illustration
      *1 Matchmark
    2. A01CG3OE02

      Remove the 10 bolts.

    3. A01CD2CE01

      Using a plastic-faced hammer, tap on the ring gear to remove it from the case.

  2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING


    1. A01CCP5E03

      Using SST, remove the front differential case front tapered roller bearing from the differential case.

      SST
      09950-40011   ( 09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011 )
      09950-60010   ( 09951-00340 )
    2. A01CC0IE01

      Using SST, remove the front differential case tapered roller bearing front outer race.

      SST
      09387-00041   ( 09387-01030, 09387-01040, 09387-02010, 09387-02020 )

  3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING


    1. A01CF4ZE03

      Using SST, remove the front differential case rear tapered roller bearing from the differential case.

      SST
      09950-40011   ( 09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011 )
      09950-60010   ( 09951-00340 )
    2. A01CC0IE01

      Using SST, remove the front differential case rear tapered roller bearing rear outer race and shim.

      SST
      09387-00041   ( 09387-01030, 09387-01040, 09387-02010, 09387-02020 )

  4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN


    1. A01CDOTE01

      Using a punch and hammer, loosen the staked part of the differential case.

    2. A01CFWFE01

      Using a 5 mm pin punch and hammer, tap out the pin from the ring gear side.

  5. REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT


    1. A01CBGAE01

      Remove the front differential pinion shaft from the differential case.

  6. REMOVE FRONT DIFFERENTIAL SIDE GEAR


    1. A01CD05E01

      Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears and 2 side gear thrust washers from the differential case.

  7. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL


    1. A01CBX7E03

      Place the transaxle case between aluminum plates in a vise.

    2. Using SST and a hammer, tap out the oil seal.

      SST
      09308-00010

  8. REMOVE TRANSAXLE HOUSING OIL SEAL


    1. A01CC1UE04

      Place the transaxle housing between aluminum plates in a vise.

    2. Using SST and a hammer, tap out the oil seal.

      SST
      09308-00010