PARK / NEUTRAL POSITION SWITCH INSPECTION


  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01CEVAE01

      Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.

      Standard Resistance
      Tester Connection Condition Specified Condition

      1 (RB) - 3 (PL)

      4 (B) - 9 (L)

      		 P Below 1 Ω
      Except P 10 kΩ or higher
      1 (RB) - 2 (RL) R Below 1 Ω
      Except R 10 kΩ or higher

      1 (RB) - 8 (NL)

      4 (B) - 9 (L)

      		 N Below 1 Ω
      Except N 10 kΩ or higher
      1 (RB) - 7 (DL) D, S, "+" and "-" Below 1 Ω
      Except D, S, "+" and "-" 10 kΩ or higher

      If the result is not as specified, replace the park/neutral position switch assembly.