VALVE BODY ASSEMBLY REMOVAL


  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    Tech Tips

    Click here

  2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY


    1. A01CAQ7

      Remove the 18 bolts and oil pan from the transaxle.

      Note

      Some fluid will remain in the oil pan. Remove all the pan bolts, and carefully remove the oil pan assembly.

    2. Remove the gasket from the oil pan.

    3. A01CFCEE02

      Remove the 2 magnets from the oil pan.

    4. A01CGG0

      Examine particles in the oil pan.


      1. Collect any steel chips with the removed magnets. Look carefully at the chips and particles in the oil pan and on the magnets to see the type of wear which might be found in the transaxle.

        Result
        Steel (magnetic)
        Bearing, gear and plate wear
        Brass (non-magnetic)
        Bushing wear

  3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY


    1. A01CFOD

      Remove the 2 bolts and oil strainer from the valve body.

    2. A01CEF6E02

      Remove the O-ring from the oil strainer.

  4. REMOVE TRANSMISSION VALVE BODY ASSEMBLY


    1. A01CD1T

      Remove the 11 bolts and valve body from the transaxle.

      Note

      When removing the transmission valve body assembly, be careful not to allow the transmission revolution sensor and the transaxle case to interfere with each other.

  5. REMOVE MANUAL VALVE


    1. A01CCE1

      Remove the manual valve from the valve body.