PARK / NEUTRAL POSITION SWITCH REMOVAL


  1. REMOVE NO. 1 ENGINE UNDER COVER

  2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01CCC7E02

      Disconnect the park/neutral position switch connector.

    2. A01CGC3

      Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.

    3. A01CBC9

      Remove the nut, washer and control shaft lever.

    4. A01CCXC

      Using a screwdriver, pry off the lock plate.

    5. Remove the nut and lock plate.

    6. A01CEXO

      Remove the 2 bolts and pull out the park/neutral position switch.