RELAY ON-VEHICLE INSPECTION


  1. INSPECT STARTER RELAY


    1. A01CG0EE26

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the resistance is not as specified, replace the relay.

  2. INSPECT STARTER CUT RELAY


    1. A01CG0EE26

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Terminal Connection Condition Specified Condition
      3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
      3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω

      If the resistance is not as specified, replace the relay.