STARTER (for 1.7 kW Type) DISASSEMBLY


  1. REMOVE REPAIR SERVICE STARTER KIT


    1. A01CDNQ

      Remove the nut and disconnect the lead wire from the magnetic switch.

    2. A01CE5W

      Remove the 2 screws holding the magnetic switch to the starter drive housing.

    3. Remove the magnetic switch.

    4. Remove the return spring and plunger from the starter drive housing.

  2. REMOVE STARTER YOKE ASSEMBLY


    1. A01CCO5

      Remove the 2 through-bolts, and pull out the starter yoke together with the commutator end frame.

    2. A01CCTG

      Remove the starter yoke from the commutator end frame.

  3. REMOVE STARTER ARMATURE PLATE


    1. A01CBO5

      Remove the armature plate from the starter yoke.

  4. REMOVE STARTER COMMUTATOR END FRAME COVER


    1. A01CF3V

      Using a screwdriver, pry out the commutator end frame cover.

  5. REMOVE STARTER ARMATURE ASSEMBLY


    1. A01CERYE03

      Using snap ring pliers, remove the snap ring and plate washer.

    2. Remove the armature from the commutator end frame.

      Note

      Do not drop the starter armature assembly.

  6. REMOVE PLANETARY GEAR


    1. A01CCFK

      Remove the 3 planetary gears from the starter drive housing.