OIL PRESSURE SWITCH REMOVAL


  1. REMOVE NO. 1 ENGINE UNDER COVER

  2. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil drain plug and drain the oil into a container.

    3. Clean the oil drain plug.

    4. Install the oil drain plug with a new gasket.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  3. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Disconnect the oil pressure switch connector.

    2. A01CD0R

      Separate the wire harness from the wire harness bracket.

    3. Remove the bolt and wire harness bracket.

    4. A01CF07

      Using a 24 mm deep socket wrench, remove the oil pressure switch.