OIL PUMP REASSEMBLY


  1. INSTALL OIL PUMP COVER


    1. Coat the drive rotor and driven rotor with engine oil.

    2. A01CE9NE08
      Text in Illustration
      *1 Mark

      Place the drive and driven rotors into the oil pump with the marks facing the pump cover side.

    3. Install the oil pump cover with the 5 bolts.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }

  2. INSTALL OIL PUMP RELIEF VALVE


    1. Coat the relief valve with engine oil.

    2. Insert the relief valve and spring into the pump body hole.

    3. Using a 27 mm socket wrench, install the plug.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }

  3. INSTALL OIL PUMP STRAINER


    1. Install a new gasket and the oil strainer with the 2 nuts.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }