Click here

WATER PUMP REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    Tip:

    See the steps from "Remove Engine Assembly with Transaxle" through "Remove Automatic Transaxle Assembly" (Click here).

  2. Click here

    INSTALL ENGINE ON ENGINE STAND


    1. Install the engine onto an engine stand with the bolts.

  3. Click here

    REMOVE ENGINE HANGER


    1. A01CBMWE12

      Remove the 4 bolts and 2 engine hangers.

  4. Click here

    REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH


    1. A01CEZ2

      Remove the 6 bolts and No. 1 front engine mounting bracket LH.

    2. Using a "TORX" socket wrench E8, remove the 2 stud bolts.

    3. Using a socket wrench 8mm, remove the stud bolt.

  5. Click here

    REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY


    1. A01CBCC

      Remove the bolt, No. 2 idler pulley cover plate, No. 2 idler pulley sub-assembly and idler pulley cover plate.

  6. Click here

    REMOVE V-RIBBED BELT TENSIONER ASSEMBLY


    1. A01CF37

      Remove the 5 bolts and V-ribbed belt tensioner assembly.

  7. Click here

    REMOVE WATER INLET HOUSING


    1. A01CC5O

      Remove the 2 nuts, water inlet and thermostat.

    2. Remove the gasket.

    3. Remove the 2 stud bolts.

    4. Separate the No. 1 water by-pass hose from the water inlet housing.

    5. A01CDO5E01

      Remove the drain cock plug.

    6. Remove the drain cock assembly.

    7. Remove the 2 bolts, nut, and water inlet housing.

    8. A01CG1U

      Remove the 2 O-rings.

  8. Click here

    REMOVE WATER PUMP PULLEY


    1. A01CDHLE03

      Using SST, hold the water pump pulley.

      09960-10010 09962-01000 09963-00700

    2. Remove the 4 bolts and water pump pulley.

  9. Click here

    REMOVE WATER PUMP ASSEMBLY


    1. A01CBS6

      Remove the 16 bolts, water pump assembly and water pump gasket.