ENGINE OIL COOLER REMOVAL


  1. REMOVE NO. 1 ENGINE UNDER COVER

  2. DRAIN ENGINE COOLANT

    CAUTION:

    Do not remove the reserve tank cap or radiator drain cock plug while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. A01CD8ME01
      Text in Illustration
      *1 No. 1 Engine Under Cover
      *a Hose

      Connect a hose with an inside diameter of 9 mm (0.354 in.) to the radiator drain cock as shown in the illustration.

    2. Loosen the radiator drain cock plug.

    3. Remove the reserve tank cap. Then drain the engine coolant.

      A01CF67E01
      Text in Illustration
      *1 Radiator Reserve Tank *2 Reserve Tank Cap
      *3 Radiator Drain Cock Plug - -

      Tech Tips

      Collect the engine coolant in a container and dispose of it according to the regulations in your area.

    4. Disconnect a hose with an inside diameter of 9 mm (0.354 in.) from the radiator drain cock.

  3. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil drain plug and gasket, and drain the engine oil into a container.

  4. REMOVE OIL FILTER SUB-ASSEMBLY


    1. Using SST, remove the oil filter sub-assembly.

      SST
      09228-06501

  5. REMOVE ENGINE OIL COOLER


    1. A01CE0M

      Disconnect the 2 oil cooler hoses from the oil cooler.

    2. Remove the oil cooler union, plate washer, nut, oil cooler and O-ring.