PCV VALVE REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A01CCP4

      Hold the front of the V-bank cover sub-assembly and raise it to disengage the 2 clips on the front of the cover. Continue to raise the cover to disengage the clip on the rear of the cover and remove the V-bank cover sub-assembly.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the cover to break.

  2. REMOVE VENTILATION VALVE SUB-ASSEMBLY


    1. A01CDST

      Disconnect the ventilation hose from the ventilation valve sub-assembly.

    2. A01CFJ2

      Using a 19 mm deep socket wrench, remove the ventilation valve sub-assembly.