FUEL SENDER GAUGE ASSEMBLY INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A01CF5HE01

      Remove the fuel sender gauge assembly.

    2. Check that the float moves smoothly between F and E.

    3. Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.

      Standard Resistance
      Float Level Resistance (Ω)
      F 13.5 to 16.5
      Between E and F 13.5 to 414.5 (Gradually changes)
      E 405.5 to 414.5

      If the result is not as specified, replace the fuel sender gauge assembly.