FUEL PUMP REASSEMBLY


  1. INSTALL FUEL PUMP


    1. A01CDJXE01
      Text in Illustration
      *1 O-ring
      *2 Fuel Pump Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

    2. Connect the pump harness connector.

    3. A01CG7Z

      Engage the 5 claws to install the fuel pump.

      Note


      • Make sure that the O-ring is not cut or pinched during the installation.

      • Engage the claws securely.

  2. INSTALL NO. 1 FUEL SUCTION SUPPORT


    1. A01CBOO

      Engage the 2 claws to install the No. 1 fuel suction support.

    2. A01CAPGE07

      Apply gasoline to a new O-ring and install it to the jet pump.

    3. A01CGJF

      Install the jet pump while aligning it with the installation position of the sub-tank.

      Note

      Make sure that the O-ring is not cut or pinched during the installation.

    4. A01CE19

      Engage the 2 claws to install the No. 1 fuel suction support.

    5. A01CBSL

      Install the wire harness.

    6. A01CC0N

      Connect the wire harness connector.

  3. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A01CFKME01

      Install the fuel sender gauge assembly by sliding the sender gauge downward.

    2. Connect the wire harness to the 4 harness clamps.

      Note

      Do not damage the wire harness.

    3. A01CG5J

      Connect the connector of the fuel sender gauge assembly.

    4. A01CDDA

      Install the 2 harness protectors and connect the harness clamp.

      Note

      Do not damage the wire harness.