FUEL SENDER GAUGE ASSEMBLY INSTALLATION


  1. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A01CFKME01

      Install the fuel sender gauge assembly by sliding the sender gauge downward.

    2. Connect the wire harness to the 4 harness clamps.

      Note

      Do not damage the wire harness.

    3. A01CG5J

      Connect the connector of the fuel sender gauge assembly.

    4. A01CDDA

      Install the 2 harness protectors and connect the harness clamp.

      Note

      Do not damage the wire harness.

  2. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE


    1. Install the fuel suction tube assembly with pump and gauge Click here.