PCV VALVE REMOVAL


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. Remove the windshield wiper motor and link assembly Click here.

  2. REMOVE BRAKE MASTER CYLINDER RESERVOIR WITH BRACKET


    1. A01CBAK

      Remove the 2 nuts and separate the brake master cylinder reservoir with bracket from the outer cowl top panel.

  3. REMOVE OUTER COWL TOP PANEL


    1. A01CED5

      Apply protective tape as shown in the illustration.

      Text in Illustration
      A01CC81 Protective Tape
    2. A01CCFB

      Disconnect the 2 clamps from the outer cowl top panel.

    3. Remove the 8 bolts.

    4. A01CDT7

      Remove the outer cowl top panel as shown in the illustration.

  4. DISCONNECT NO. 2 VENTILATION HOSE


    1. A01CD6R

      Disconnect the No. 2 ventilation hose from the ventilation valve sub-assembly.

  5. REMOVE VENTILATION VALVE SUB-ASSEMBLY


    1. A01CB3P

      Using a ball joint rock nut wrench (22 mm), remove the ventilation valve sub-assembly.