REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    Tech Tips

    See the steps from "Remove Engine Assembly with Transaxle" through "Remove Automatic Transaxle Assembly" Click here.

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY


    1. A01CAM5E01

      Using SST, hold the crankshaft pulley.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A01CDNY

      Remove the 8 bolts, front drive plate spacer, drive plate and ring gear sub-assembly and rear drive plate spacer.

  3. REMOVE ENGINE REAR OIL SEAL


    1. A01CEIBE01

      Using a knife, cut off the engine rear oil seal lip.

    2. Using a screwdriver, pry out the engine rear oil seal.

      Note

      Be careful not to damage the crankshaft.

      Tech Tips

      Tape the screwdriver tip before use.