FRONT CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE ENGINE UNDER COVER

  3. REMOVE NO. 1 ENGINE UNDER COVER

  4. REMOVE REAR ENGINE UNDER COVER RH

  5. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH


    1. A01CAQT

      Remove the 4 bolts and the front suspension member reinforcement RH.

  6. REMOVE V-RIBBED BELT


    1. A01CEBW

      Release the V-ribbed belt tension by turning the V-ribbed belt tensioner counterclockwise, and remove the V-ribbed belt from the V-ribbed belt tensioner.

    2. While turning the V-ribbed belt tensioner counterclockwise, align with its holes, and then insert a 5 mm bi-hexagon wrench into the holes to fix the V-ribbed belt tensioner.

  7. REMOVE CRANKSHAFT PULLEY


    1. A01CFZDE02

      Using SST, loosen the crankshaft pulley bolt.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A01CBOUE02

      Using SST, remove the crankshaft pulley bolt and crankshaft pulley.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )
    3. A01CBG4

      Remove the pulley set key from the crankshaft.

  8. REMOVE TIMING CHAIN CASE OIL SEAL


    1. A01CGA1E01

      Using a knife, cut off the timing chain case oil seal lip.

    2. Using a screwdriver, pry out the timing chain case oil seal.

      Note

      After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.