CYLINDER HEAD DISASSEMBLY


  1. REMOVE VALVE LIFTER


    1. A01CBSVE01

      Remove the 16 valve lifters from the cylinder head.

      Tech Tips

      Arrange the valve lifters in the correct order.

  2. REMOVE INTAKE VALVE


    1. A01CF43E05
      Text in Illustration
      *1 Wooden Block

      Using SST and wooden blocks, remove the 16 retainer locks.

      SST
      09202-70020   ( 09202-00010 )

    2. Remove the 8 retainers, compression springs and intake valves.

      Tech Tips

      Arrange the removed parts in the correct order.

  3. REMOVE EXHAUST VALVE


    1. A01CER4E05
      Text in Illustration
      *1 Wooden Block

      Using SST and wooden blocks, remove the 16 retainer locks.

      SST
      09202-70020   ( 09202-00010 )

    2. Remove the 8 retainers, compression springs and exhaust valves.

      Tech Tips

      Arrange the removed parts in the correct order.

  4. REMOVE VALVE STEM OIL SEAL


    1. A01CE9PE01

      Using needle nose pliers, remove the oil seals.

  5. REMOVE VALVE SPRING SEAT


    1. A01CD4VE01

      Using compressed air and a Magnet Hand, remove the valve spring seats by blowing air onto them.

  6. REMOVE NO. 1 STRAIGHT HEAD SCREW PLUG


    1. A01CGJ0

      Using a 14 mm straight hexagon wrench, remove the 2 screw plugs and 2 gaskets.

      Note

      If water leaks from the straight screw plug or the plug is corroded, replace it.

  7. REMOVE STUD BOLT

  8. REMOVE RING PIN