REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY (for CVT)

    Click here

  2. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for Automatic Transaxle)

    Click here

  3. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY


    1. A01CCOPE02

      Using SST, hold the crankshaft.

      SST
      09213-54015   ( 91651-60855 )
      09330-00021
    2. A01CCX3

      Remove the 8 bolts, rear spacer, drive plate and ring gear sub-assembly, and front spacer.

  4. REMOVE REAR CRANKSHAFT OIL SEAL


    1. A01CEIBE09
      Text in Illustration
      *1 Protective Tape
      *a Cut Position

      Using a knife, cut off the lip of the oil seal.

    2. Using a screwdriver, pry out the oil seal.

      Note

      After removing, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.