Click here

FRONT CRANKSHAFT OIL SEAL INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL FRONT CRANKSHAFT OIL SEAL


    1. Apply MP grease to the lip of a new front crankshaft oil seal.

    2. A01CFXVE01

      Using SST and a hammer, tap in the front crankshaft oil seal until its surface is flush with the front oil seal retainer edge.

      09223-22010
      Note:

      • Keep the lip free from foreign matter.

      • Do not tap on the oil seal at an angle.

  2. Click here

    INSTALL CRANKSHAFT PULLEY


    1. Using SST, secure the crankshaft pulley in place and tighten the bolt.

      09213-54015 91651-60855
      09330-00021
      180 N*m 1835 kgf*cm 132 ft.*lbf
  3. Click here

    INSTALL V-RIBBED BELT

    Tip:

    The illustration shows the V-ribbed belt layout.


    1. A01CB9LE01

      Using SST, slowly turn the V-ribbed belt tensioner clockwise and install the V-ribbed belt.

      09216-42010 09216-04010
      Note:

      • Make sure that SST and other tools are set to the tensioner securely.

      • When compressing the V-ribbed belt tensioner, slowly turn the tensioner.

  4. Click here

    INSTALL RADIATOR RESERVE TANK BRACKET


    1. Install the radiator reserve tank bracket with the 2 bolts.

      12 N*m 122 kgf*cm 9 ft.*lbf
  5. Click here

    INSTALL RADIATOR RESERVE TANK ASSEMBLY


    1. Install the radiator reserve tank assembly to the radiator reserve tank bracket.

      12 N*m 122 kgf*cm 9 ft.*lbf

    2. Connect the No. 1 and No. 2 water by-pass hoses.

    3. Connect the wire harness clamp to the radiator reserve tank assembly.

  6. Click here

    INSTALL RADIATOR COVER SUB-ASSEMBLY


    1. Install the radiator cover sub-assembly with the 4 clips.

  7. Click here

    INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH


    1. Install the front suspension member reinforcement RH with the 4 bolts.

      96 N*m 978 kgf*cm 71 ft.*lbf
  8. Click here

    INSPECT FOR OIL LEAK

  9. Click here

    INSTALL REAR ENGINE UNDER COVER RH

  10. Click here

    INSTALL NO. 1 ENGINE UNDER COVER

  11. Click here

    INSTALL ENGINE UNDER COVER

  12. Click here

    INSTALL FRONT WHEEL RH

    103 N*m 1050 kgf*cm 76 ft.*lbf