MASS AIR FLOW METER REMOVAL


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. Remove the windshield wiper motor and link assembly Click here.

  2. SEPARATE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY


    1. A01CBAK

      Remove the 2 nuts and separate the brake master cylinder reservoir with bracket from the outer cowl top panel.

  3. REMOVE COWL TOP PANEL OUTER SUB-ASSEMBLY


    1. A01CED5

      Apply protective tape as shown in the illustration.

      Text in Illustration
      A01CC81 Protective Tape
    2. A01CCFB

      Disconnect the 2 clamps from the outer cowl top panel.

    3. Remove the 8 bolts.

    4. A01CDT7

      Remove the outer cowl top panel as shown in the illustration.

  4. REMOVE MASS AIR FLOW METER


    1. A01CERB

      Separate the mass air flow meter connector.

    2. Remove the 2 screws and mass air flow meter.