Click here

DRIVE BELT INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL V-RIBBED BELT

    Tip:

    The illustration shows the V-ribbed belt layout.


    1. A01CB9LE01

      Using SST, slowly turn the V-ribbed belt tensioner clockwise and install the V-ribbed belt.

      09216-42010 09216-04010
      Note:

      • Make sure that SST and other tools are set to the tensioner securely.

      • When compressing the V-ribbed belt tensioner, slowly turn the tensioner.

  2. Click here

    INSTALL RADIATOR RESERVE TANK BRACKET


    1. Install the radiator reserve tank bracket with the 2 bolts.

      12 N*m 122 kgf*cm 9 ft.*lbf
  3. Click here

    INSTALL RADIATOR RESERVE TANK ASSEMBLY


    1. Install the radiator reserve tank assembly to the radiator reserve tank bracket.

      12 N*m 122 kgf*cm 9 ft.*lbf

    2. Connect the No. 1 and No. 2 water by-pass hoses.

    3. Connect the wire harness clamp to the radiator reserve tank assembly.

  4. Click here

    INSTALL RADIATOR COVER SUB-ASSEMBLY


    1. Install the radiator cover sub-assembly with the 4 clips.

  5. Click here

    INSTALL REAR ENGINE UNDER COVER RH

  6. Click here

    INSTALL FRONT WHEEL RH

    103 N*m 1050 kgf*cm 76 ft.*lbf