DRIVE BELT REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE REAR ENGINE UNDER COVER RH

  3. REMOVE RADIATOR COVER SUB-ASSEMBLY


    1. A01CDEV

      Using a clip remover, remove the 4 clips and radiator cover sub-assembly.

  4. SEPARATE RADIATOR RESERVE TANK ASSEMBLY


    1. A01CERE

      Disconnect the wire clamp.

    2. A01CBJF

      Disconnect the No. 1 and No. 2 water by-pass hoses.

    3. Remove the bolt and radiator reserve tank assembly.

  5. REMOVE RADIATOR RESERVE TANK BRACKET


    1. A01CF8W

      Remove the 2 bolts and radiator reserve tank bracket.

  6. REMOVE V-RIBBED BELT


    1. A01CB9LE01

      Using SST, slowly turn the V-ribbed belt tensioner clockwise.

      SST
      09216-42010   ( 09216-04010 )

    2. Remove the V-ribbed belt from each pulley and slowly return the tensioner.

      Note


      • Make sure that SST and other tools are set to the tensioner securely.

      • When compressing the V-ribbed belt tensioner, slowly turn the tensioner.

      • Be careful not to pinch your fingers between the parts.