MASS AIR FLOW METER INSTALLATION


  1. INSTALL MASS AIR FLOW METER


    1. A01CAV7

      Install the mass air flow meter with the 2 screws.

    2. Connect the mass air flow meter connector.

  2. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY


    1. A01CCFB

      Install the outer cowl top panel with the 8 bolts.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }

    2. Connect the 2 clamps to the outer cowl top panel.

    3. Remove the protective tape.

  3. INSTALL BRAKE MASTER CYLINDER RESERVOIR WITH BRACKET


    1. A01CBAK

      Install the brake master cylinder reservoir with bracket to the outer cowl top panel with the 2 nuts.

      Torque:
      6.5 N*m  { 66 kgf*cm, 58 in.*lbf }

  4. INSTALL WINDSHIELD WIPER MOTOR AND LINK


    1. See the steps from "Install windshield wiper motor and link assembly" through "Install windshield wiper arm cover" Click here.