MASS AIR FLOW METER REMOVAL


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK


    1. See the steps from "Remove windshield wiper arm cover" through "Remove windshield wiper motor and link assembly" Click here.

  2. SEPARATE BRAKE MASTER CYLINDER RESERVOIR WITH BRACKET


    1. A01CBAK

      Remove the 2 nuts and separate the brake master cylinder reservoir with bracket from the outer cowl top panel.

  3. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY


    1. A01CED5

      Apply protective tape as shown in the illustration.

      Text in Illustration
      A01CC81 Protective Tape
    2. A01CCFB

      Disconnect the 2 clamps from the outer cowl top panel.

    3. Remove the 8 bolts.

    4. A01CDT7

      Remove the outer cowl top panel as shown in the illustration.

  4. REMOVE MASS AIR FLOW METER


    1. A01CAV7

      Disconnect the mass air flow meter connector.

    2. Remove the 2 screws and mass air flow meter.