ACCELERATOR PEDAL INSTALLATION


  1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • The accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.


    1. Type A:


      1. A01CD53

        Install the accelerator pedal sensor assembly with the 2 bolts.

        Torque:
        5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Type B:


      1. Install the accelerator pedal sensor assembly with the 2 nuts.

        Torque:
        5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the accelerator pedal sensor assembly connector.