CAMSHAFT OIL CONTROL VALVE INSTALLATION


  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. A01CFM8E10
      Text in Illustration
      *1 New O-ring

      Apply a light coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly.

    2. A01CCSE

      Install the camshaft timing oil control valve assembly with the bolt.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

    3. Connect the camshaft timing oil control valve connector.

  2. INSTALL VACUUM HOSE CLAMP


    1. A01CF0T

      Install the vacuum hose clamp with the bolt.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  3. INSPECT FOR OIL LEAK

  4. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY


    1. A01CCFB

      Install the outer cowl top panel with the 8 bolts.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }

    2. Connect the 2 clamps to the outer cowl top panel.

    3. Remove the protective tape.

  5. INSTALL BRAKE MASTER CYLINDER RESERVOIR WITH BRACKET


    1. A01CBAK

      Install the brake master cylinder reservoir with bracket to the outer cowl top panel with the 2 nuts.

      Torque:
      6.5 N*m  { 66 kgf*cm, 58 in.*lbf }

  6. INSTALL WINDSHIELD WIPER MOTOR AND LINK


    1. See the steps from "Install windshield wiper motor and link assembly" through "Install windshield wiper arm cover" Click here.