CAMSHAFT OIL CONTROL VALVE REMOVAL


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK


    1. See the steps from "Remove windshield wiper arm cover" through "Remove windshield wiper motor and link assembly" Click here.

  2. SEPARATE BRAKE MASTER CYLINDER RESERVOIR WITH BRACKET


    1. A01CBAK

      Remove the 2 nuts and separate the brake master cylinder reservoir with bracket from the outer cowl top panel.

  3. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY


    1. A01CED5

      Apply protective tape as shown in the illustration.

      Text in Illustration
      A01CC81 Protective Tape
    2. A01CCFB

      Disconnect the 2 clamps from the outer cowl top panel.

    3. Remove the 8 bolts.

    4. A01CDT7

      Remove the outer cowl top panel as shown in the illustration.

  4. REMOVE VACUUM HOSE CLAMP


    1. A01CF0T

      Remove the bolt and the vacuum hose clamp.

  5. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. A01CCSE

      Disconnect the camshaft timing oil control valve connector.

    2. Remove the bolt and the camshaft timing oil control valve assembly.

    3. A01CFM8E10
      Text in Illustration
      *1 O-ring

      Remove the O-ring from the camshaft timing oil control valve assembly.