BACK DOOR OUTSIDE GARNISH (w/ Tire Carrier) REMOVAL


  1. REMOVE CENTER BACK DOOR GARNISH


    1. A00JXPP

      Detach the 4 clips and remove the back door center garnish.

  2. REMOVE BACK DOOR SIDE GARNISH LH


    1. A00JW8G

      Detach the 2 clips and claw and remove the back door side garnish.

  3. REMOVE BACK DOOR SIDE GARNISH RH


    1. A00JXPA

      Detach the 2 clips and claw and remove the back door side garnish.

  4. REMOVE BACK DOOR TRIM COVER


    1. A00JZC7

      Remove the back door trim cover as shown in the illustration.

  5. REMOVE UPPER TOOL BOX PANEL SUB-ASSEMBLY


    1. A00JV27

      Remove the upper tool box panel sub-assembly as shown in the illustration.

  6. REMOVE TOOL CASE


    1. A00JTVV

      Detach the 2 claws and remove the tool case.

  7. REMOVE BACK DOOR INSIDE HANDLE BEZEL (for Face to Face Seat Type)


    1. A00K0S7

      Remove the screw.

    2. Detach the 5 claws and remove the back door inside handle bezel.

  8. REMOVE BACK DOOR TRIM PANEL ASSEMBLY


    1. A00JWOS

      Detach the claw and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A00JZLH

      Remove the screw.

    3. w/o Back Door Tire Carrier:


      1. A00JX6B

        Remove the bolt.

      2. Detach the 15 clips and remove the back door trim panel assembly.

    4. w/ Back Door Tire Carrier:


      1. A00JZAO

        Remove the bolt.

      2. Detach the 16 clips and remove the back door trim panel assembly.

    5. for Face to Face Seat Type:


      1. A00K0PU

        Remove the screw and bolt.

      2. Detach the 15 clips and remove the back door trim panel assembly.

  9. REMOVE BACK DOOR INSIDE HANDLE SUB-ASSEMBLY (for Face to Face Seat Type)


    1. A00JYJA

      Detach the guide.

    2. Detach the claws and remove the inside handle sub-assembly.

    3. Disconnect the 2 cables from the inside handle sub-assembly.

  10. REMOVE BACK DOOR SERVICE HOLE COVER


    1. A00JV03

      Remove the service hole cover.

  11. REMOVE BACK DOOR OUTSIDE HANDLE LH


    1. w/ Back Door Tire Carrier:


      1. A00JVRJE01
        Text in Illustration
        *1 Hole Plug

        Remove the hole plug.

      2. Remove the 2 nuts and back door outside handle.

      3. Disconnect the cable.

    2. w/o Back Door Tire Carrier:


      1. A00JXB7

        Remove the 2 nuts and back door outside handle.

      2. Disconnect the cable.

  12. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    A00JUJW

    1. Disconnect the connector and remove the 4 nuts.

    2. Detach the 4 clips and remove the back door outside garnish.