SIDE STEP REASSEMBLY

Tech Tips

Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
A bolt without a torque specification is shown in the standard bolt chart Click here.

INSTALL STEP LIGHT ASSEMBLY (w/ Illumination)
1. for 5 Door:
  1. Install the 2 lights with the 4 bolts.
2. for 3 Door:
  1. Install the light with the 2 bolts.

INSTALL STEP LIGHT BRACKET (w/ Illumination)

A00KY4Y

Install a nose piece to an air riveter or hand riveter.
Insert the mandrel part of a new rivet into the nose piece.

Using the riveter, install the step light bracket with the 3 rivets as shown in the illustration.

Tech Tips

If the rivet cannot be cut, pull it once and cut it.

Note

A00L053E15

Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.

Text in Illustration
*1	Riveter
*2	Mandrel
*a	INCORRECT
*b	CORRECT

Confirm that the rivets are seated properly against the step light bracket.
Do not tilt the riveter when installing the rivet to the step light bracket.

Do not leave any space between the rivet head and step light bracket.

Text in Illustration
*1	Riveter
*a	INCORRECT
*b	CORRECT

A00KZCUE13

Do not leave any space between the step light bracket and step plate. Firmly hold together the 2 items while installing the rivet.

Text in Illustration
*1	Riveter
*a	INCORRECT
*b	CORRECT

INSTALL STEP LIGHT ASSEMBLY (w/ Illumination)
1. Install the bulb.
2. Turn the socket in the direction indicated by the arrow to install it.
INSTALL STEP PANEL WIRE LH (w/ Illumination)
1. for 5 Door:
  1. Attach the 9 clamps to install the wire.
2. for 3 Door:
  1. Attach the 5 clamps to install the wire.

INSTALL SIDE STEP BRACKET SUB-ASSEMBLY LH

Install a nose piece to an air riveter or hand riveter.
Insert the mandrel part of a new rivet into the nose piece.

A00KUPX

Using the riveter, install the side step bracket with 3 rivets as shown in the illustration.

Tech Tips

If the rivet cannot be cut, pull it once and cut it.

Note

A00L053E15

Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.

Text in Illustration
*1	Riveter
*2	Mandrel
*a	INCORRECT
*b	CORRECT

Confirm that the rivets are seated properly against the side step bracket.
Do not tilt the riveter when installing the rivet to the side step bracket.

Do not leave any space between the rivet head and side step bracket.

Text in Illustration
*1	Riveter
*a	INCORRECT
*b	CORRECT

A00KZCUE13

Do not leave any space between the side step bracket and step plate. Firmly hold together the 2 items while installing the rivet.

Text in Illustration
*1	Riveter
*a	INCORRECT
*b	CORRECT

INSTALL NO. 2 SIDE STEP PLATE COVER
1. Install the No. 2 side step plate cover.
INSTALL STEP PLATE COVER LH
1. Install the side step plate cover.
INSTALL STEP PLATE LH (for 5 Door)
1. Attach the 17 claws to install the step plate.
2. Install the 3 bolts and clip.
  
  Torque:
  
  2.3 N*m { 24 kgf*cm, 20 in.*lbf }
INSTALL STEP PLATE LH (for 3 Door)
1. Attach the 14 claws to install the step plate.
2. Install the 3 bolts and clip.
  
  Torque:
  
  2.3 N*m { 24 kgf*cm, 20 in.*lbf }
INSTALL NO. 2 ROCKER PANEL MOULDING PROTECTOR
1. Install the No. 2 rocker panel moulding protector with the 2 bolts.
  
  Torque:
  
  3.0 N*m { 31 kgf*cm, 27 in.*lbf }
INSTALL NO. 3 SIDE STEP BRACKET LH
1. Install the No. 3 side step bracket with the 2 bolts.
  
  Torque:
  
  6.0 N*m { 61 kgf*cm, 53 in.*lbf }
INSTALL NO. 2 SIDE STEP BRACKET LH
1. Install the No. 2 side step bracket with the 2 bolts.
  
  Torque:
  
  6.0 N*m { 61 kgf*cm, 53 in.*lbf }
INSTALL SIDE STEP BRACKET LH
1. Install the side step bracket with the 2 bolts.
  
  Torque:
  
  6.0 N*m { 61 kgf*cm, 53 in.*lbf }