REAR COMBINATION LIGHT ASSEMBLY INSPECTION


  1. INSPECT REAR COMBINATION LIGHT LENS AND BODY LH


    1. A0095N2E01
      Text in Illustration
      *a

      Component without harness connected

      (Rear Combination Light Lens and Body)

      Check the stop light.


      1. Apply battery voltage to the connector and check the LED illumination condition.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 1 (STOP)

        Battery negative (-) → 4 (E)

        		 LED illuminates

        If the result is not as specified, replace the rear combination light lens and body.

    2. A0095N2E04
      Text in Illustration
      *a

      Component without harness connected

      (Rear Combination Light Lens and Body)

      Check the taillight.


      1. Apply battery voltage to the connector and check the LED illumination condition.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 2 (TL)

        Battery negative (-) → 4 (E)

        		 LED illuminates

        If the result is not as specified, replace the rear combination light lens and body.