REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE UPPER REAR BUMPER RETAINER LH


    1. A00XGYV

      Detach the 2 guides and remove the upper rear bumper retainer LH.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A00XGDW

      Turn the socket in the direction indicated by the arrow and remove it.

    2. Remove the bulb.

  3. REMOVE BACK UP LIGHT BULB


    1. A00XJTG

      Turn the socket in the direction indicated by the arrow and remove it.

    2. Remove the bulb.

  4. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. A00XC1B

      Detach the 4 clamps.

    2. A00XI3U

      Turn the cover in the direction indicated by the arrow and disconnect the wire.