HIGH INTENSITY DISCHARGE HEADLIGHT BULB REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE NO. 1 HEADLIGHT BACK COVER


    1. A00JW5R

      Turn the back cover in the direction indicated by the arrow and remove it.

  3. REMOVE DISCHARGE HEADLIGHT BULB


    1. A00JY59

      Turn the headlight control ECU socket in the direction indicated by the arrow and disconnect the headlight control ECU socket.

    2. A00JXHE

      Release the set spring lock as shown in the illustration and remove the bulb.

      Note

      Do not touch the glass part of the bulb.