REAR CENTER SEAT OUTER BELT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type LH Side) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH


    1. Remove the rear No. 1 seat assembly LH Click here.

  2. REMOVE REAR SEAT UPPER RECLINING COVER LH

    A0099V5E01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 3 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

    A009AHO

    1. Remove the 3 screws and handle.

  4. REMOVE CENTER SEAT HINGE COVER RH

    A0099E9

    1. Using a clip remover, remove the clip.

    2. Detach the 2 guides and remove the cover.

  5. REMOVE REAR SEAT CUSHION MOULDING LH

    A0097OT

    1. Using a clip remover, detach the clip.

    2. Using a moulding remover, detach the 3 claws.

    3. Move the moulding in the direction of the arrow to detach the guide and remove the moulding.

  6. REMOVE REAR SEATBACK LOCK STRIKER COVER LH

    A0097MS

    1. Using a clip remover, detach the 3 clips and remove the cover.

  7. REMOVE SEAT CUSHION COVER WITH PAD


    1. A00979X

      Detach the hooks.

    2. A0098GM

      Detach the hook and remove the seat cushion cover with pad.

  8. REMOVE CENTER SEATBACK ASSEMBLY

    A0095WW

    1. Remove the 2 bolts and center seatback.

  9. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH


    1. A0094II

      Remove the bolt and inner belt, and disconnect the 3 point type belt anchor.

  10. REMOVE RECLINING ADJUSTER KNOB CAP LH

    A009BFME01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the claw and guide, and then remove the cap.

      Tech Tips

      Tape the screwdriver tip before use.

  11. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH


    1. A009806

      Remove the 2 screws.

    2. A009A7NE02

      Disconnect the cable in the order shown in the illustration and remove the lever.

  12. REMOVE SEAT BELT ANCHOR COVER CAP


    1. A009B4EE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and remove the cap.

      Tech Tips

      Tape the screwdriver tip before use.

  13. REMOVE REAR SEAT SHOULDER BELT COVER


    1. Disconnect the outer belt from the cover.

    2. A0098MT

      Detach the 2 claws and 2 guides, and then remove the cover.

  14. REMOVE REAR SEATBACK COVER

    A0098Q3

    1. Using a screwdriver, detach the 4 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  15. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH

    A009BW9

    1. Using a clip remover, detach the 7 clips and remove the carpet.

  16. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

    A0096D1

    1. Detach the 4 claws and remove the 2 supports.

  17. REMOVE SEATBACK COVER WITH PAD

    A009B6WE01

    1. Remove the hog rings and detach the hooks, and then remove the seatback cover with pad.

      Text in Illustration
      *1 Hook
      *2 Hog Ring
    2. A0096TH

      Disconnect the outer belt from the seatback cover with pad.

  18. REMOVE REAR SEAT SHOULDER BELT GUIDE

    A009569

    1. Detach the claw and guide, and then remove the belt guide.

  19. REMOVE NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

    A0094VW

    1. Remove the nut and bolt, and then detach the 2 claws and remove the seat belt.