REAR CENTER SEAT INNER BELT ASSEMBLY (for 60/40 Split Double-folding Seat Type RH Side) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE REAR SEAT HEADREST ASSEMBLY


    1. Remove the headrest.

  2. REMOVE REAR SEATBACK COVER


    1. Press the seatback lock release button to release the lock and fold down the seatback.

    2. A00JTTP

      Using a screwdriver, detach the 4 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH

    A00JTZN

    1. Using a clip remover, detach the 5 clips.

    2. Detach the 2 claws and remove the carpet.

  4. REMOVE REAR SEATBACK ASSEMBLY RH

    A00K0BD

    1. Remove the bolt and detach the 2 claws, and then disconnect the outer belt.

    2. Remove the 2 bolts that secure the seatback to the floor.

    3. Fold down the seatback, remove the bolt from the hinge, and then remove the seatback.

      Note

      Be careful not to damage the vehicle body.

  5. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY

    A0094KCE02
    Text in Illustration
    *1 Band

    1. Detach the fastening tape and remove the band.

    2. Remove the bolt and inner belt.