REAR NO. 1 SEAT OUTER BELT ASSEMBLY (for 3 Door) REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover.

  2. REMOVE MAT SET PLATE COVER

    A00K0R9E01
    Text in Illustration
    *1 Protective tape

    Tech Tips

    Use the same procedure for all mat set plate covers.


    1. Using a screwdriver, detach the 2 claws and remove the mat set plate cover.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

    A00JXEQ

    1. Remove the 5 screws.

    2. Detach the 6 claws and remove the rear floor mat rear support plate.

  4. REMOVE QUARTER TRIM COVER HOLE LH

    A00JWNT

    1. Detach the 2 claws and 2 guides and remove the quarter trim cover hole.

  5. REMOVE REAR FLOOR CARPET ASSEMBLY

    A00JXUH

    1. Remove the rear floor carpet.

  6. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    A00JZHD

    Tech Tips

    Use the same procedure for the other No. 1 luggage compartment trim hook.


    1. Remove the luggage compartment trim hook by turning it clockwise.

  7. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    A00K0X1E01
    Text in Illustration
    *1 Protective tape

    Tech Tips

    Use the same procedure for the other tonneau cover holder cap.


    1. Using a screwdriver, detach the 2 claws and remove the tonneau cover holder cap.

      Tech Tips

      Tape the screwdriver tip before use.

  8. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

    A00JX1FE01
    Text in Illustration
    *1 Protective tape

    Tech Tips

    Use the same procedure for the other front deck side trim cover.


    1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

      Tech Tips

      Tape the screwdriver tip before use.

  9. REMOVE OUTER LAP BELT ANCHOR COVER

    A00JV70

    Tech Tips

    Use the same procedure for the other outer lap belt anchor cover.


    1. Detach the 3 claws and remove the outer lap belt anchor cover.

  10. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. A009BU3

      Remove the bolt and disconnect the front seat outer belt floor anchor.

    2. A009BJ2

      Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

    3. Remove the 3 bolts and 2 screws.

    4. Detach the 9 claws and 12 clips and remove the deck trim side panel.

      A00996C

  11. REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH

    A00JZIS

    1. Detach the 7 clips.

    2. A00JUS8

      Detach the 4 claws and 2 guides, pass the rear No. 1 seat belt floor anchor through the rear quarter trim panel and remove the rear quarter trim panel.

  12. REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH


    1. A0099T1

      Remove the bolt and rear No. 1 seat outer belt shoulder anchor.

    2. A00964L

      Remove the 2 bolts and rear No. 1 seat outer belt assembly.