FRONT SEAT INNER BELT ASSEMBLY INSPECTION


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

    A009C2EE01
    Text in Illustration
    *1 Connector A *2 Connector B
    *a

    Component without harness connected

    (Front Seat Inner Belt Assembly)

    		 - -

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A2 - B3 Always Below 1 Ω
      A3 - B1

      Seat belt fastened

      (Buckle switch on)

      		 1 MΩ or higher
      A3 - B1

      Seat belt unfastened

      (Buckle switch off)

      		 Below 1 Ω

      If the result is not as specified, replace the front seat inner belt assembly.