FRONT PASSENGER SEAT BELT WARNING LIGHT INSTALLATION


  1. INSTALL TELLTALE LIGHT ASSEMBLY


    1. Install the light with the 2 screws.

  2. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. Connect the connector.

    2. Attach the 4 clips to install the instrument panel finish panel end.

  3. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel finish panel cushion.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.